Parkside PWD 25 C4 Vertaling Van De Originele Gebruiksaanwijzing pagina 31
Beschikbare talen
Beschikbare talen
4. Fit the cap of the drain opening
(13). Turn ⭮ .
Filter cleaning button
NOTICE! Risk of damage! The filter
cleaning function must only be car-
ried out with the pleated filter. If an-
other filter is used, clean it manually.
If the suction power decreases, you
can improve it by pressing the filter
cleaning button.
1. Turn the appliance on.
2. Close the suction opening of the
suction hose (19). To do this, press
the suction hose onto the floor.
3. Press the filter cleaning button (6)
for a few seconds.
Air is blown through the pleated fil-
ter to remove debris and dirt.
4. Repeat the process a few times.
Maintenance
The device is maintenance free.
Storage
Always store the device and ac-
cessories:
• clean
• dry
• protected against dust
• out of the reach of children
Notes
• The dirt container is not suitable
for storing liquids. Empty the dirt
container after wet vacuuming.
Preparing the appliance for storage
(Fig. F)
1. Wind up the power cord (7) on the
holder (5).
2. Push the telescopic suction tube
(18) together and attach the re-
taining lug (17) to the suction tube
holder (8).
3. Wind the suction hose (19) around
the appliance and insert the
handle (22) into the suction tube
(18).
4. Insert the other accessories into
the accessory holders (4) on the
motor head (3) and the feet (11).
Disposal/
environmental
protection
The device, accessories and pack-
aging should be properly recycled.
Waste electrical and electron-
ic equipment (WEE) must not
be disposed of with domestic
waste.
The symbol of the crossed-out
wheeled bin means that this product
must not be disposed of as unsorted
municipal waste at the end of its use-
ful life.
Directive 2012/19/EU on waste
electrical and electronic equip-
ment:
Consumers are legally obliged to re-
cycle electrical and electronic equip-
ment in an environmentally sound
manner at the end of its life. In this
way, environmentally friendly and re-
source-saving recycling is ensured.
Depending on the implementation in
national law, you may have the fol-
lowing options:
• Return to a shop,
• Hand over to an official collection
point,
• Return to the manufacturer/distrib-
utor.
This does not affect accessories en-
closed with the old devices or tools
without any electrical components.
GB
MT
31
