Parkside PWD 25 C4 Vertaling Van De Originele Gebruiksaanwijzing pagina 26
Beschikbare talen
Beschikbare talen
GB
MT
The nozzles and suction
•
hose must not be at the
same height as your head
while working. There is a
risk of injury.
Do not vacuum hot,
•
glowing, flammable, ex-
plosive or hazardous
substances. These in-
clude hot ashes, petrol,
solvents, acids or alkalis
amongst others. Risk of
fire and injury.
Make sure not to damage
•
the power cord by pulling
it over sharp edges,
getting it trapped or by
pulling on the cable.
Never use the power cord
•
to pull the plug out of
the outlet or to pull the
device. Protect the power
cord from heat, oil and
sharp edges.
Never transport the
•
device while the drive is
running.
Switch off the device and
•
disconnect the plug from
the power outlet. Make
sure that all moving parts
have come to a complete
stop
when leaving the
•
device,
26
before changing the ac-
•
cessories,
before removing ob-
•
structions or loosening
blockages,
before checking the
•
device, cleaning it or
performing mainten-
ance work on it.
If the device starts to
•
vibrate abnormally, an
immediate check is re-
quired, :
Examine for loose parts
•
and tighten these,
search for signs of
•
damage,
replace damaged ac-
•
cessories. For repairs,
contact the service
centre.
Cleaning, maintenance
and storage
Allow the motor to cool
•
down before storing the
device for a longer peri-
od.
Replace worn or dam-
•
aged parts in the in-
terests of safety. Use only
original spare parts and
accessories. Using ex-
ternally produced parts
results in the immedi-
