Pulox Checkme Lite Gebruiksaanwijzing pagina 19
start taking new medications and do not change your current
medications or alter their dosages without prior approval from your
physician.
This device does not have any alarm functions and can therefore signal
neither too low nor too high measured values.
1.
Information about the checkme
1.1 Application area
The Checkme series health monitor is used to measure, display, analyze,
store and check several physiological parameters, including ECG values and
oxygen saturation (SpO2). The device can be used both at home and in
medical facilities.
Measurements of ECG values should be performed only on adults.
The results measured with this device are for initial assessment only and
cannot be used for diagnosis or therapy determination.
1.2 The device
1. Touchscreen
2. Internal SpO2 sensor
3. Micro-D socket: connection of a D-cable for charging
4. Start button
• When the monitor is off, press this button to turn it on.
• When the monitor is on, press and hold the button for 2 seconds to turn
it off.
• During operation, press this key to switch to the main screen or return
to the higher-level menu.
5. Right ECG electrode: Press on it with your right thumb.
18
EN
