Seca 675 Handleiding pagina 21
Beschikbare talen
Beschikbare talen
Switching the weight display
The weight display can be switched between kilogrammes (kg) and pounds (lbs).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
Switching off the scale
– To switch off the scale, press the Start
key again.
Taring weight display (TARE)
The Tare function is very useful if an additional weight, e.g. that of a wheelchair, is to be
ignored for weighing purposes.
Proceed as follows:
– Press the green Start key.
– First place the additional weight (e.g.
the wheelchair) on the scale and acti-
vate the Tare function by pressing and
holding the HOLD/TARE key.
The display is reset to zero,
in the display until weight is detected to
be stable. Only then is the Tare function
fully activated. The note "NET" appears.
You can now perform as many weigh-
ing operations as you like.
– Now move the patient and the wheel-
chair previously weighed onto the scale.
The scale determines the weight of the
additional load.
The tare function can be re-activated at
any time with an altered weight or with-
out a weight.
– Put the new weight on the scale and
depress and hold the HOLD/TARE
key.
– The Tare weight is erased when the
scale is turned off.
Model 675
0. 0
flashes
GB
21
