Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6 | Operating Instructions
NOTE
When using the remote control, point it at the air dis-
tributor to have the best signal transmission. The air dis-
tributor beeps as soon as it receives a signal.
NOTE
The icons that are shown in the remote control display
depend on the settings you are accessing.
NOTE
After selecting COOL or HEAT mode, the compressor
may delay starting for 3 minutes. This feature protects
the compressor.
NOTE
To set the system clock, see chapter 6.10, "Setting the
system clock" on page 14.
6.2
How to heat and cool effectively
The following general measures are very useful to reduce the
heat load within a vehicle and improve the performance of the
air conditioner:
l Park your vehicle in the shade when possible.
l Position your vehicle with the sunshade facing the sun-side.
This reduces exposure to direct sunlight.
l Close all doors, skylights and windows, close the curtains
and open the sunshade or awning.
l Turn off within the vehicle, all electrical appliances running
unnecessary. This will further reduce the heat load.
l Cook outside the vehicle when possible.
l In case of exceptionally high temperatures, turn on the air
conditioner in advance during the morning.
l If vehicle interior has already heated up, ventilate your
vehicle by opening doors and windows before starting the
A/C unit.
l Regularly clean the vehicle's roof; dirty roofs heat up more.
In the same way that many factors affect the total heat load
within a vehicle, many additional factors can affect the air con-
ditioner working efficiency. It may be advisable to consult your
vehicle manufacturer to fully understand the total heat load of
your vehicle.
6.3
Dealing with condensation
When warm and moist air within the vehicle meets a cold sur-
face, this is likely to result in condensation water. This is also
known as "sweating". To deal with this:
l Close and seal all doors, skylights, and windows. This re-
duces the entrance of warm moist air.
l Operate the inside fan on High fan speed, avoiding Low
and Auto fan speeds.
When operating the air conditioner, condensate water is pro-
duced and drained onto the roof. This is normal. The amount of
condensate water depends on air humidity. High humidity in-
side your vehicle will result in more condensate water being
generated.
NOTE
Losses or damages caused by condensate water are not
within the warranty scope.
12 / 146
6.4
Choosing and using a generator or
inverter
The CTT 20G - 24G requires a mains-quality AC power source
for correct operation. If you decide to supply power using a
generator or an inverter, you must consult your generator / in-
verter supplier to confirm suitability and sizing of the gener-
ator / inverter for your application.
NOTE
Losses or damage caused by the use of a generator or
inverter are not within the warranty scope.
6.5
Using the remote control
Fig. 32 Remote control overview
Display icons
Information
1 Mode display
COOL / FAN / DRY / HEAT / AUTO
2 Fan speed dis-
Low / Medium / High / Auto
play
3 Lock function
-
display
4 Sleep function
-
display
5 Timer ON / OFF
-
status indicator
6 Clock / Timer
Real time clock, time of timer during
display
setup.
7 Temperature
Shows the setpoint temperature or the in-
display
door temperature. Units in °C or °F.
8 Data Transmis-
Symbols shows up briefly when the re-
sion
mote control transmits data to the A/C
unit.
9045225A_OI-II_Cool Top Trail 20G-24G ML
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
