Dometic SCE320 Montagehandleiding pagina 10
Beschikbare talen
Beschikbare talen
EN
• Outdoor use
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor in-
stallation and/or improper operation or maintenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect installation, assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
7 Technical description
General description
The charger charges the starting battery and the house battery by solar panels.
The charger can be adapted to different battery types via DIP switches.
The charger offers the following functions:
• Microprocessor-controlled, temperature-compensated IUOU charging programs for various battery types
• Maximum power peak tracking (MPPT)
• Only SCE320B, SCE360B: Bluetooth connection for controlling the charger via the NDS Dometic mobile app
The charger has the following protective mechanisms:
• High voltage protection
• Low voltage protection
• High temperature protection
• Low temperature protection (only LiFePO4 batteries)
• Battery overcharge protection (only with optional temperature sensors)
• Reverse current protection
• Protection against short circuit
• Reverse polarity protection (only for house battery connection)
The charger can be connected to the DTB01 display (optional) for remote controlling.
Only SCE320B, SCE360B: If a Bluetooth N-BUS device is present in the N-BUS network, the NDS Dometic mobile
app can be used for controlling the charger.
A temperature sensor (optional) can be connected to monitor the battery temperature during the charging process.
Description of the device
Fig.
on page 3
10
