3.1
Installing the device safely
DANGER! Explosion hazard
Never mount the device in areas where there is a risk of gas or dust explosion.
WARNING! Risk of injury
• The device must be mounted and fastened in such a way that it cannot fall down.
• When positioning the device, ensure that all cables are suitably secured to avoid any form of trip
hazard.
NOTICE! Damage hazard
• Do not place the device near heat sources (heaters, direct sunlight, gas ovens, etc.).
• Place the device in a dry location where it is protected against splashing water.
3.2
Operating the device safely
WARNING! Explosion hazard
• Only use the device in closed, well-ventilated rooms.
• Do not operate the device under the following conditions:
In salty, wet or damp environments
In the vicinity of corrosive fumes
In the vicinity of combustible materials
In areas where there is a danger of explosions
WARNING! Electrocution hazard
• Observe that parts of the device may still conduct voltage even if the fuse has blown.
• Do not disconnect any cables when the device is still in use.
NOTICE! Damage hazard
• Ensure that the air inlets and outlets of the device are not covered.
• Ensure a good ventilation.
• The device shall not be exposed to rain.
3.3
Safety precautions when handling batteries
WARNING! Risk of injury
• Batteries contain aggressive and caustic acids. Avoid battery fluid coming into contact with your
body. If your skin does come into contact with battery fluid, wash that part of your body thoroughly
with water. If you sustain any injuries from acids, contact a doctor immediately.
• When working on batteries, do not wear any metal objects such as watches or rings. Lead acid bat-
teries can cause short circuits which can cause serious injuries.
• Only use insulated tools.
• Do not place any metal parts on the battery.
EN
7