Dometic PSB12-40 Montagehandleiding pagina 22
EN
Setting up the input current limit
This setting limits the input current to the charger. It can be useful when the power source (e.g. alternator) is not so
powerful. This setting can be activated in order not to stress the system. This function can only be activated by the
DIP switch, not by a external controller (display or app).
Slide the DIP switch accordingly.
Table 8: Input current limit configuration
DIP switch po-
sition (gray)
Setting up the output current limit
For each model you can choose between three output currents. This setting can be useful in case the maximum out-
put current exceeds the recommended values for charging bord batteries, as might happen with AGM or Lead/Acid
batteries in general.
This function can only be activated by the DIP switch, not by an external controller (optional DTB01 display or mobile
app).
22
DIP switch position (gray)
Function
Current limit on
Current limit off
Function
Silent mode off
Model
Max. input current Limited input cur-
PSB12-40
55 A
PSB12-80
95 A
PSB24-40
55 A
PSB24-60
75 A
PSB12/24-20
60 A
PSB12/24-40
95 A
PSB24/12-40
40 A
PSB24/12-80
55 A
rent
30 A
50 A
40 A
40 A
30 A
55 A
20 A
25 A
