Kärcher RCV 2 Oorspronkelijke Gebruiksaanwijzing pagina 17
Beschikbare talen
Beschikbare talen
Do not throw / Keep away from water.
Intended use
The device consists of two units, a charging station and
a battery-powered cleaning robot.
● The device is intended for fully automatic cleaning of
textile and hard floor coverings indoors. It can be
used for autonomous, continuous maintenance
cleaning on all common floor coverings.
● This device has been developed for use in private
households and is not intended for the load imposed
by commercial use.
Environmental protection
The packing materials can be recycled. Do not
dispose of packaging as household rubbish but
place it in recycling.
Old devices contain valuable, recyclable materials that
should be recycled. Batteries and battery packs contain
substances which should not be released into the envi-
ronment. Therefore, please dispose of old devices, bat-
teries and battery packs using suitable collection
systems.
Adhere to the recommendations of the legislature re-
garding the handling of lithium ion batteries. Dispose of
used and defective battery packs in accordance with the
applicable regulations.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.de/REACH
Accessories and spare parts
Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.
Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.
Device description
Illustration A
Battery terminals
1
Fall sensor (x3)
2
Steering roller
3
Wiper cloth
4
On/Off button
5
"Return to charging station" button
6
Collision sensor
7
Power supply
8
Charging station
9
Filter
10
2-in-1 dust container with water reservoir
11
Brush cover
12
Brush
13
Side brush
14
Functional description
The device consists of a charging station and a battery-
powered cleaning robot.
The mobile cleaning robot obtains its energy from a
built-in rechargeable battery. The cleaning robot can
clean for up to 130 minutes with a single battery charge.
It automatically returns to the charging station to re-
charge when the battery charge decreases.
The cleaning robot moves systematically. It navigates
with gyroscope, which enables it to carry out zigzag
sweep.
The flat design of the cleaning robot allows it to clean
under furniture such as beds, sofas and cupboards.
The cleaning robot has fall sensors that detect stairs
and steps and prevent falls, as well as collision sensors
that detect and avoid obstacles.
The battery for the cleaning robot is charged in the
charging station.
If the cleaning robot starts the cleaning work from the
charging station, it returns to the charging station when
the battery charge is insufficient.
As soon as the charging process is finished, the clean-
ing robot automatically leaves the charging station and
continues the cleaning work. The cleaning robot also re-
turns to the charging station when it has finished clean-
ing.
LED display
Lights up blue
Flashes blue slowly
Flashes blue fast
Flashes green slowly Cleaning robot charging
Lights up green
Flashes red slowly
Flashes red fast
Illustration V
(1) "Return to charging station" button
(2) Moving ahead
(3) Turn right
(4) the machine rotates 180 ° to the right
(5) Edge cleaning
(6) Water quantity adjustment
(7) Suction power adjustment
(8) Spot cleaning
(9) Start/Pause
(10)Turn left
(11)Silent cleaning
English
Status displays
Status
Driving autonomously
Autonomous driving paused
WLAN connection mode
Cleaning robot fully charged or
successfully connected
Battery too empty to start
Error situation
Functions
Remote controller
17
