Kärcher RCV 2 Oorspronkelijke Gebruiksaanwijzing pagina 22
Beschikbare talen
Beschikbare talen
4. Install the new filter.
Illustration N
a Fit the filter.
b Fit the filter flap.
c Close the filter flap.
5. Install the 2-in-1 dust container with water reservoir
, see chapter Installing 2-in-1 dust container with
water reservoir .
6. Press the On/Off button.
Cleaning continues.
Replacing the brush
We recommend replacing the brush after 6 to 12
months.
1. Remove the brush.
Illustration P
a Press the clamps together.
b Remove the brush cover.
c Remove the brush.
d Remove the brush bearing.
2. Install the new brush.
Illustration R
a Fit the brush bearing.
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
Fault
Battery does not charge Charging contacts are dirty.
The cleaning robot is not
returning to the charging
station
The cleaning robot pro-
duces unusual noises
The cleaning robot does
not continue cleaning
22
Troubleshooting guide
Cause
Ambient temperature below 0 °C or
above 35 °C.
Battery is discharged.
The cleaning robot is too far away from
the charging station.
Not enough space around the charging
station.
There are too many obstacles around the
charging station.
A foreign object could be caught in the
brush, the side brush or in a wheel.
The cleaning robot is in "Do not disturb"
mode.
The cleaning robot is being charged
manually or has been placed in the
charging station.
b Fit the brush.
c Fit the brush cover and press it down until it audi-
bly latches into place.
Replacing the side brush
We recommend replacing the side brush after 3 to
6 months.
1. Turn the cleaning robot upside down.
2. Remove the side brush.
Illustration S
3. Install the new side brush.
Illustration T
Replacing the rechargeable battery
The rechargeable battery has reached the end of its life
if the cleaning robot constantly drives to the station for
charging after a short cleaning operation.
1. Switch off the cleaning robot, see chapter Switching
off the cleaning robot.
2. Send the cleaning robot to the Customer Service.
Observe the regulations for shipping lithium-ion bat-
teries, see Chapter transport.
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
Rectification
1. Wipe the charging contacts on both the
charging station and the cleaning robot
with a dry cloth.
1. Use the cleaning robot at temperatures
above 0 °C and below 35 °C.
1. Manually place the cleaning robot on the
charging station and let it charge complete-
ly.
1. Move the cleaning robot closer to the
charging station.
2. Manually place the cleaning robot on the
charging station.
1. Ensure that there is sufficient space
around the charging station, see chapter
Setting up the charging station.
1. Place the charging station in a more open
area, see chapter Setting up the charging
station.
1. Switch off the cleaning robot.
2. Remove any foreign objects.
1. Ensure that the cleaning robot is not in "Do
not disturb" mode.
1. Wait until the cleaning robot is fully
charged.
English
