Pulox PO-200 Gebruiksaanwijzing pagina 18
Pulsoxymeter
This device is not intended for treatment.
The User Manual is published by our company. All rights reserved.
1. Safety
1.1 Instructions for Safe Operations
Check the main unit and all accessories periodically to make sure that there is
no visible damage that may affect patient's safety and monitoring
performance about cables and transducers. It is recommended that the device
should be inspected once a week at least. When there is obvious damage, stop
using the device.
Necessary maintenance must be performed by qualified service engineers
ONLY. Users are not permitted to maintain it by themselves.
The oximeter cannot be used together with devices not specified in User's
Manual. Only the accessory that appointed or recommendatory by
manufacture can be used with this device.
This product is calibrated before leaving factory.
1.2 Warning
Explosive hazard—DO NOT use the oximeter in environment with inflammable
gas such as some ignitable anesthetic agents.
DO NOT use the oximeter while the testee measured by MRI and CT.
The person who is allergic to rubber can not use this device.
The disposal of scrap instrument and its accessories and packings (including
battery, plastic bags, foams and paper boxes) should follow the local laws and
regulations.
Please check the packing before use to make sure the device and accessories
are totally in accordance with the packing list, or else the device may have the
possibility of working abnormally.
Please don't measure this device with functional tester for the device's related
information.
1.3 Attention
Keep the oximeter away from dust, vibration, corrosive substances, explosive
materials, high temperature and moisture.
If the oximeter gets wet, please stop operating it.
When it is carried from cold environment to warm or humid environment,
please do not use it immediately.
DO NOT operate keys on front panel with sharp materials.
High temperature or high pressure steam disinfection of the oximeter is not
permitted. Refer to User Manual in the relative chapter for instructions of
cleaning and disinfection.
Do not immerse the oximeter in liquid. When it needs cleaning, please wipe its
surface with disinfectant solution using a soft cloth. Do not spray any liquid
18
EN
