Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION AND CONNECTION
INFORMATION!
Remove all packaging. When removing the packaging, make sure not to damage the appliance
with a sharp object.
Removing the blocking rods
WARNING!
Before the first use of the appliance, transport rods must be removed. A blocked washing machine
may be damaged when it is switched on for the first time. Warranty shall be void in cases of such
damage!
1
Move the hoses and
undo the screws on the back
of the washing machine.
Remove the two angular
pieces.
2
Slide the angular pieces
onto the grove in the
blocking rod; before doing
so, rotate the right angular
piece to the opposite side.
3
Use the angular pieces
to rotate the blocking rods
by 90°and pull them out.
4
Cover the two holes
through which the blocking
rods were inserted with
plastic plugs, and redo the
screws that you undid in
step 1.
The plastic plugs are
supplied in the bag with the
washing machine instruction
manual.
15
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
