Warning/
Indication on the display unit
Information
Water drain system alert
Display of warning
System warning to run the
Drum clean (Self-cleaning
programme)
After the washing programme
is complete, the signs
unit.
Warning by the system for
detecting excessive foaming
during the washing
programme
Power supply failure warning
(»PF«/Power Failure)
58
.
will alternate on the display
Error cause and description, what to do?
Alert about reduced water flow in the pumping
stage. Check the following:
•
is the pump filter clean,
•
is the drain hose clogged,
•
is the drain clogged,
•
if the discharge hose placed is placed
below the maximum and above the
minimum height (see chapter
»INSTALLATION AND
CONNECTION/Connecting and securing
the water discharge hose«).
In case of a
washing, proceed as follows:
•
clean the dosing container,
•
clean the water supply hose, detergent
and
dispenser, and rubber door gasket,
•
clean the pump filter (see chapter
»CLEANING AND MAINTENANCE«) and
•
run the self-cleaning programme Drum
clean (see chapter »WASHING STEPS
(1 7)/3. Step: Programme table«).
Self-cleaning programme is used to clean the
drum and to remove detergent residues and
bacteria. The drum must be empty. Do not
add detergent or softener! You can add some
spirit vinegar (approx. 2 dl) or sodium
bicarbonate (1 tablespoon or 15 g) for effective
descaling. We recommend that you use the
programme at least once a month or whenever
the warning appears
In case of excessive foaming in the washing
machine or leak of foam through the detergent
dispenser tray, the washed laundry has to be
rinsed thoroughly with a large amount of
water. Choose a washing programme, but do
not add any detergent.
•
We recommend choosing the
Rinse&Softening programme.
•
Decrease the amount of detergent added.
The system detected a power supply failure
during the washing programme progress,
which affected functional execution of the
washing programme.
Check the power supply network to which
your washing machine is connected.
warning on the display after
.