Step 6: Starting the washing programme
Press the (9) START/PAUSE button.
TIME REMAINING TO PROGRAMME COMPLETION or DELAY END time (if set) will appear on the
display.
Symbols will be lit on the selected functions.
After pressing the (9) START/PAUSE button, the spinning rate (except in the case of the Drum clean
(Self-cleaning programme) and SPIN (SPINNING RATE/PUMP STOP/DRAIN)), the Child lock and the
Sound off functions can be adjusted/changed, while other settings cannot be changed.
INFORMATION!
If the TIME REMAINING UNTIL PROGRAMME COMPLETION flashes three times on the display
unit, and there is an audible signal, this means that the washing machine door is open or not
closed tightly. Close the washing machine door and press the (9) button START/PAUSE again
to resume the washing programme.
Step 7: End of the washing programme
The washing machine will indicate the end of the washing programme with an acoustic signal and
will appear on the display until the washing machine switches into low standby mode or switches off.
After 5 minutes, the
1. Open the washing machine door.
2. Take the laundry from the drum.
3. Wipe the rubber door gasket and the door glass.
4. Close the door!
5. Shut off the water supply tap.
6. Switch off the washing machine (rotate the program selector knob (1) to the OFF
7. Unplug the power cord from the outlet.
48
sign will no longer be displayed.
position.