Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INTERRUPTIONS AND CHANGING THE
PROGRAMME
Manual interruption
To stop and cancel a washing programme, rotate the program selector knob (1) to the OFF
position. Signal lights will flash on the display. At the same time, the washing machine pumps the
water out of the washing machine drum. When the water is pumped out, washing machine door will
be unlocked. If the water in the washing machine is hot, the washing machine will automatically cool
it and pump/drain it out.
Personal settings
Basic or default settings for each washing programme can also be changed. When you select the
washing programme and Additional functions, the combination can be stored by pressing the
((9) START/PAUSE button and holding it for 5 seconds (the time is counted down on the display unit).
The sign »SAVED« (»saved«) will appear on the display.
The programme will remain stored until it is changed using the same procedure.
Personal settings can also be reset to factory settings in the user menu.
AdaptTech
When a washing programme setting is used three times in a row, this setting is stored as default and
will always be suggested when you select that washing programme
function. If you manually store the settings of a washing programme, the ADAPTTECH function on
this washing programme is deactivated.
Pause button
The washing programme can always be stopped by pressing the (9) START/PAUSE button. The
washing programme is temporarily paused when the time remaining until programme completion is
flashing on the display unit. If there is no water in the drum and water temperature is not too high,
then the door will unlock after a certain period of time, and they can be opened. To resume the washing
program, first close the door and then press the key (9) START/PAUSE button.
Adding/removing laundry during washing machine operation
After a certain period of time, the washing machine door can be opened if the water level and
temperature are below a predefined threshold.
If the conditions below are met, then the electronic door lock is released and the washing machine
door can be opened;
•
water temperature in the drum has to be suitable,
•
water level in the drum has to be below a certain value.
In order to add or remove laundry from the washing machine during programme operation, proceed
as follows:
1. Press the (9) START/PAUSE button and hold it for 3 seconds.
2. If all conditions for release of electronic door lock are met, then you can open the washing machine
door and add or remove laundry from the drum.
3. Close the washing machine door!
will appear on the display unit:
this is called the ADAPTTECH
49
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
