Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
40
Select the »Pump stop«
soaked in the water from the last rinse cycle in order to prevent it from
creasing when you are unable to take it from the washing machine
immediately after the washing programme is complete. You may set the
desired spinning rate. To continue the program, press the
(9) START/PAVZA button that is lit. Water will be drained (pumped out)
and the final spin cycle will be run.
QUICKER (FAST)
When the QUICKER (FAST) function is activated, the washing programme
will be carried out with a shorter washing duration. There are two available
choices (depending on the selected washing programme).
If you choose the QUICKER (FAST) function, the function indicator (light)
will turn from a partly lit to fully lit symbol, and the total programme
time on the display unit will be adjusted accordingly.
To further shorten the washing programme, press the button (5) FAST
(FAST) again.
If you press the button once again, the setting is reset back to default.
First press
QUICKER (FAST)
Second press
SUPER QUICKER (SUPER FAST)
Third press
DEFAULT (DEFAULT)
We recommend a half-load for the Cotton programme.
DELAY END (DELAY END)
Press on the position (7) DELAY END (DELAY END) to delay the
programme completion time by up to 24 hours.
Settings procedure:
•
Select the desired programme and extra functions.
•
Press the position (7) DELAY END (DELAY END) to activate the
function.
•
Repeatedly press this position to set the desired programme
completion time (with 30-minute increments up to 6 hours, and 1-hour
increments thereafter, up to 24 hours.)
•
To activate the function, press the (9) START/PAUSE button.
Washing machine starts counting down the set time. When the countdown
reaches the programme duration (e.g. 2:30), the washing programme
starts automatically.
To cancel or change the delayed end of the washing programme, rotate
the program selector knob (1) to position OFF
To quickly cancel the programme completion delay, press the position
(7) DELAY END (DELAY END) and hold it for 3 seconds. The washing
programme will resume.
Example of function setting:
function when you wish the laundry to stay
for at least two seconds.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
