Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
How to enable remote start of the appliance?
Move the programme selection button to ConnectLife/REMOTE CONTROL (remote control).
Press the (9) START/PAUSE button (the door must be closed).
How to add a user?
Check that the appliance is switched on; the programme selection button can be in any position. Then
do the following:
•
In the ConnectLife app, open the add device menu.
•
Follow the instructions in the application ConnectLife where you will pair the phone and the
appliance.
-
Select the type of appliance.
-
Scan the QR code (it can be found on the warranty card or on the rating plate of the appliance).
•
On the appliance:
-
Simultaneously press the positions (7+8). A countdown will start 3-2-1 and
on the appliance.
-
Press the button (8); the display will show
-
Press the button (9) START/PAUSE. A 3-minute countdown will start on the appliance.
•
You can then complete and confirm the setting in the app.
How to remove the users (UnPair)?
Check that the appliance is switched on; the programme selection button can be in any position. Then
do the following:
On the appliance:
•
Simultaneously press the positions (7+8). A countdown will start 3-2-1 and
appliance.
•
Repeatedly press (8); until the display shows
•
Press the button (9) START/PAUSE. A 1-minute countdown will start on the appliance.
INFORMATION!
This step will remove all active users of the appliance. If you want to operate the appliance
remotely again, you will need to repeat the process of adding a user
Which Wi-Fi router can be used?
Only 2.4 GHz networks are supported. During the connection setup, if the ConnectLife app cannot
find your local network, proceed as follows:
•
your router is operating at the frequency of 2.4 GHz,
•
your network is hidden, and
•
your signal is strong enough.
Do you have more questions?
Please visit us at www.connectlife.io or contact us at hello@connectlife.io.
26
•
In the ConnectLife app, instructions will guide you through the
process of entering the appropriate data for your appliance to connect
to your home network.
.
.
will appear
will appear on the
.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
