GB
MT
• Make sure that all moving parts
have come to a complete stop.
• Remove the battery (29) from the
device.
• Ensure that the protective cover
(17) completely covers the circular
saw blade (16).
• Always carry the tool by the handle
(3) or use the storage case (12)
provided.
Cleaning,
maintenance and
storage
WARNING! Risk of injury due to
unintentional start-up. Protect your-
self when performing maintenance or
cleaning work. Switch off the device
and remove the battery (29).
You should have any repair and main-
tenance work that is not described in
these instructions carried out by our
Service Centre. Only use original re-
placement parts.
Cleaning
WARNING! Electric shock! Never
spray down the device with water.
NOTICE! Risk of damage. Chemic-
al substances may attack the plastic
parts of the machine. Do not use any
cleaning agents or solvents.
• Keep the ventilation slits, motor
housing and handles of the ma-
chine clean. Use a damp cloth or
brush to do this.
• Try to clean resinous surfaces with
a damp, lukewarm cloth that has
been wrung out well. Make sure
that no liquids can get into the in-
terior of the housing! Alternatively,
you can use a special cleaner (res-
in solvent) or multispray. Please
take notice of the safety informa-
38
tion and instructions provided by
the manufacturer of the special
cleaner/multispray.
Cleaning the circular saw blade
Tools must be cleaned regularly.
Tool parts made of light metal alloys,
e.g. resin, may only be cleaned with
solvents that do not impair the mech-
anical properties of these materials.
Maintenance
The device is maintenance free.
Care of circular saw blades
Maintenance work and modifications
to circular saw blades should only
be performed by a professional, i.e.
a person with specialist training and
experience who is familiar with the
design requirements and the neces-
sary safety steps.
Storage
Always store the device and ac-
cessories:
• clean
• dry
• protected against dust
• In the case provided (12)
• out of the reach of children
Devices with battery:
• The storage temperature for the
battery and device is between 0 °C
and 45 °C. Avoid extreme cold
or heat during storage to ensure
the battery output is not adversely
affected.
• Remove the battery from the
device before storage over a longer
period (see separate operating in-
structions for battery and charger).