DANGER CAUSED BY ELECTRIC CURRENT
WARNING!
Contact with live cables or components can be fatal !
Please observe the following safety instructions in order to prevent an ex p osure to electric
current:
Do not use the unit if the mains cable or plug are damaged.
Ń=
In this case, have a new connection cable installed by GRAEF Customer Service or an
Ń=
authorised specialist before continuing to use the unit.
By no means open the housing of the unit. There is a risk of electric shock if live connections
Ń=
are touched or if the electrical or mechanical structure is changed.
Never touch live parts. This can cause an electric shock and even death.
Ń=
SAFETY INSTRUCTIONS FOR THE ELECTRICAL CONNECTIONS
For safe and fault-free operation of the unit, the following req u irements have to be met during
the electrical connection:
Before connecting the unit, compare the connecting data ( v oltage and freq u ency) on the
Ń=
type plate with those of your energy network. This data must match to prevent damage to
the unit. If in doubt, consult a q u aliІed electrician.
The socket outlet must be protected by at least a 10A circuit breaker.
Ń=
Make sure that the power cable is not damaged and is not laid across hot surfaces or sharp
Ń=
edges.
The connecting cable must not be stretched tightly.
Ń=
The electrical safety of the unit is guaranteed only if it is operated on a properly installed
Ń=
power supply. If in doubt, have the in-house installation checked by a q u aliІed electrician.
The manufacturer shall not assume responsibility for damage which has been caused by
absent or interrupted protective conductor.
UNPACKING THE UNIT
When unpacking the unit, proceed as follows:
Remove the unit from the box .
Ń=
Remove the packaging parts.
Ń=
CAUTION!
Danger of injury !
The very sharp blade can cause injuries.
Remove any stickers on the unit ( d o not remove the type plate) .
Ń=
32