Graef MYtiny Handleiding pagina 33
REQUIREMENTS ON THE INSTALLATION LOCATION
For safe and fault free operation of the unit, the following req u irements of the installation loca-
tion have to be met:
The unit has to be placed on a solid, łat, horizontal, and non-slipping surface with a sufІci-
Ń=
ent weight-carrying capacity.
Make sure that the unit cannot topple over.
Ń=
Choose the location in such a way that children cannot reach the blade of the unit or the
Ń=
supply lines.
Never use the unit outdoors, and always keep it in a dry place.
Ń=
The unit is not designed for installation in a wall or a built-in cupboard.
Ń=
Do not set up the unit in a hot, wet or moist environment.
Ń=
The socket has to be easily accessible so that the power cable can be removed easily in
Ń=
case of emergency.
If the connecting cable is too long, you can adjust it to the req u ired length using the cable
Ń=
winder.
PRIOR TO FIRST USE
CAUTION!
Danger of injury !
The very sharp blade can cause injuries.
Proceed with caution when wiping the blade.
Ń=
BASIC CLEANING
The unit , but especially the blade, must be wiped with a damp cloth before Іrst use to remove
any production residues. Also refer to the chapter on ХCleaning and maintenanceЧ.
INITIAL OPERATION
WARNING!
Danger of injury !
The very sharp blade can cut off body parts. Especially your Іngers and thumbs are at risk.
For this reason, do not reach into the space between the stop plate and the blade as long
Ń=
as the stop plate is not closed completely, i. e . set to Х0Ч.
Do not touch the blade with your Іngers.
Ń=
33
