Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
BATTERY CHARGING (only for version with optional hybrid KIT installed)
CAUTION!
Charge the batteries with the installed battery
charger when the last segment of the battery icon
(A, Fig. 29) starts flashing
each job. Keeping the batteries charged make
their life last longer.
Recharging is essential when the multifunction
display shows screen (B).
WARNING!
When the batteries are discharged, charge them
as soon as possible, as that condition makes
their life shorter.
1.
Drive the machine on a level ground and engage the
parking brake.
2.
Turn the ignition key (51) to "0".
3.
Connect the battery charger plug (D) to a mains electrical
socket.
WARNING!
Check that the voltage and frequency shown on
the battery charger plate (D) match the mains
supply values.
NOTE
When the battery charger is connected to the
electrical mains, all machine functions are
automatically cut off.
The multifunction display shows the screen (C) as in
the figure.
4.
When the battery charger green battery symbol (E) is
flashing, the batteries are recharging.
5.
When the battery charger green battery symbol (E) is lit
steadily, the batteries are charged.
6.
For further information about the battery charger operation,
see the Battery Charger Manual.
7.
Disconnect the battery charger cable from the electrical
mains.
03/2016
INSTRUCTIONS FOR USE
, or at the end of
CHARGE
1466472000 - SW5500, FLOORTEC R 985
OK
E
D
Figure 29
ENGLISH
A
B
C
P100924
39
Advertenties
Hoofdstukken
Inhoudsopgave
