• All maintenance and repairs must be performed by someone who is
qualified and perfectly aware of the dangers and regulations relating
to these procedures. Any poorly performed repair risks causing serious
danger. If repairs are necessary, go to your seller (whose address
should be on the warranty card).
• Only use the apparatus if the EZA 80Ah or EZA 130Ah and all
connections are intact.
• Cut off electricity flow during any work on the apparatus
• Bear in mind the heat produced by the apparatus and keep a clear
distance of 20 cm around it.
• Install the apparatus in a dry place which is sheltered from splashes of
water.
• It is essential that the power pack is mounted the right way up: any
other position is forbidden.
• Protect the apparatus from corrosive gases and from dirty or humid
air.
• Fix the apparatus to the floor using supplied attachment straps and
clips.
4- Correct usage
The EZA 80Ah and 130Ah V2 are meant for on-board mobile use. They are
equipped with several charging plugs according to the available sources of
energy.
It is possible to attach equipment with a voltage of 12V, or a 12VCC/230VAC
inverter with a maximum output of 1800W.
The EZA 80Ah and 130Ah V2 must not be used to start a vehicle's engine.
40