Inhoudsopgave
Advertenties
• After 3 seconds of inactivity, the function is activated and a "chaser"
is gradually displayed, until the temperature reaches about 85° C.
"The chaser" :
• The LED on the LCD screen slowly displays a chaser until the
temperature reaches 85° C.
• When the temperature reaches 85°C the program stops automatically and
the hob beeps 3 times.
• The timer function is not available for this mode.
• After having turned on the plate with the ON/OFF button,
• The stew mode starts and the display shows a "chaser".
• After slowly heating, the temperature is maintained
• You can use the timer function for this mode (see chapter
• If you want to turn off the cooker you need to do so
SAUTÉ mode
This mode is ideal for cooking food in a small quantity of oil in order
to sauté it.
• After having turned on the hotplate with the ON/OFF button,
activate sauté mode. The light above the button is switched
on and a beep sounds confirmation.
• The default sauté temperature is 4 and the LCD screen will
display « F4 ».
• If you want to change setting, you have to press + or
-button, after each press the hob sounds a confirmation.
• When the oil and pan temperature reaches the fry
temperature setting, the hob beeps 2 times.
• For information : you will find below the approximate
temperatures for 1L of oil (Ingenio cookware)
STEW mode (slow cooking)
activate stew mode. The light above the button is switched
on and a beep sounds.
between 80 and 100°C.
"Timer function"). If you use this function, the cooker will
stop automatically at the end of the programmed cooking
time. For this mode the maximum time is 2 hours.
manually by pressing any button or on/off button.
23
EN
Advertenties
Inhoudsopgave
