Inhoudsopgave
Advertenties
• To adjust the setting, press on the + or - button; each time you
press the button a beep will be emitted to confirm the change.
B1 (small) 16cm pan B2 (medium) 18cm pan B3 (large) 20cm pan
~ 0,4 litres – 0,9 litres ~ 1 litre – 1,5 litres
• When the water reaches 100° C, the appliance emits 3 beeps
and stops heating.
• If you want to cancel boil mode, you can select another
program or press the on/off button.
• The timer function is not available for this mode.
Timer function for all functions
except boiling water and heating milk
• After setting the cooking parameters, press the timer button
• Press +/- button to set the cooking time ( 1-99min).
• For stew , after 60 min, the LCD shows « 1 H » and « 2 H »
• After 3 seconds without any action the Timer starts and
• You can adjust the setting for the manual, fry and sauté
• If you press a second time on the Timer button ,the LCD
• Once the timer goes below one minute, the countdown will
• To remove the Timer function, press the Timer button for
Cleaning
You must disconnect the power lead, wait until the ceramic glass plate has
cooled, then follow the instructions below to clean the appliance:
1. Ceramic glass plate: if the ceramic glass plate is very dirty, clean using a
damp non-abrasive sponge or for more stubborn stains use an appropriate
cleaning product which is designed for use on ceramic hobs.
(L) and the LCD screen will display the default time setting
(15 min). A beep sounds and the timer setting starts blinking
with a default time of 15 min.
for 1 and 2 hours
LCD stops blinking.
cooking programmes by pressing the +/- buttons.
starts blinking again and you can change setting with +/-.
continue in seconds until the timer reaches 00, then the
hotplate will switch off and emit 3 beeps.
3 seconds.
~ 2 litres – 2,5 litres
25
EN
Advertenties
Inhoudsopgave
