Inhoudsopgave
Advertenties
3
CLEANING AND STORAGE
IT IS IMPORTANT TO FOLLOW THE CLEANING AND STORAGE SPECIFICATIONS SO AS
TO ENSURE THE CORRECT OPERATION OF THE EQUIPMENT AND TO PREVENT THE
INCIDENTS DESCRIBED IN SECTION 7. TROUBLESHOOTING TABLE
•
Follow the indications shown in the pictures in the section [3] for emptying, cleaning and storing the unit.
•
Always clean the equipment prior to storage or after use (never leave the pump with phytosanitary products in
its interior for more than 8 hours). For a comprehensive cleaning, operate the backpack using clean water.
•
To extend the correct operation and the useful life of the sprayer, it is important to use and clean the filters using a brush
with plenty of water, never sharp objects. See the location of the filters in the photo [3.5]. The suction filter has only
one mounting position for proper operation. No force is required for installation [3.6].
ONCE THE EQUIPMENT HAS BEEN CLEANED, IT IS RECOMMENDED TO FILL IT WITH TWO
LITRES OF CLEAN WATER FOR ITS SUBSEQUENT STORAGE. THIS WILL PREVENT THE
PUMP VALVES FROM DRYING OUT AND WILL MAKE IT EASIER TO START THE PUMP THE
VERY NEXT OPERATING DAY. [3.8]
•
For the exterior cleaning of the equipment, use a damp cloth with neutral soap. Never clean with pressurised water.
•
Store the equipment with clean water and out of reach of children in a clean, dry place, away from direct
sunlight and excess heat and cold (between 5°C and 30°C). (See battery storage in Section 6. Battery).
•
During transport, the sprayer must be firmly secured to prevent risk of falls, collisions or injury.
4
MAINTENANCE
THIS EQUIPMENT INCLUDES WEAR AND TEAR COMPONENTS, INCLUDING BATTERY,
MOTOR, GASKETS, ETC. IT IS IMPORTANT TO UNDERTAKE THE MAINTENANCE OF
THE EQUIPMENT PRIOR TO EACH CAMPAIGN AND TO FOLLOW THE MAINTENANCE
SPECIFICATION SO AS TO ENSURE THE CORRECT OPERATION OF THE EQUIPMENT, TO
EXTEND ITS USEFUL LIFE AND TO PREVENT THE INCIDENTS SUMMARISED IN SECTION
7. TROUBLESHOOTING TABLE.
VERIFICATION: At the beginning of each spraying campaign, it is recommended to carry out the verification using
•
water as regards the correct operation of the equipment. If damaged, repair prior to use with the original spare parts.
EXTEND GASKET SERVICE LIFE: Lubricate the moving parts regularly. See photo [4.1]
•
•
NOZZLE CALIBRATION: Prior to each spraying campaign, check the condition of the nozzle and replace if significant
damage or wear and tear is discerned. [4.2] Only "mesh 50" filters are to be used, with a filter mesh width of 0.35mm.
•
BATTERY: For battery maintenance, see Section 6. Battery.
SECURITY REGULATIONS
5
•
European legislation requires the user to have received the necessary training for the use, cleaning and
maintenance of this type of products and equipment, in addition to having understood the dangers involved.
•
Do not operate electrical equipment in explosive atmospheres or in the presence of flammable substances.
•
Do not expose the electrical equipment to water or high humidity.
•
Do not modify the apparatus. Do not use if damaged, deformed or changed from its original shape.
•
Carefully read the chemical product's label and follow the pre-registrations and doses recommended by the
manufacturer.
•
Do not spray against the wind or on very windy days.
•
Do not spray people, animals or electrical installations.
•
Avoid contamination of land and waterways. For the disposal of empty containers and obsolete products
comply with the manufacturer's recommendations and prevailing legislation.
•
STATE OF CALIFORNIA PROPOSITION - PROP 65 WARNING: This product can expose you to one or
more chemicals, including lead, which is known to the State of California to cause cancer and reproductive harm.
Wash hands after handling. For more information go to www.p65warnings.ca.gov
PERSONAL SAFETY
•
Use personal protective equipment such as goggles, masks, safety footwear, appropriate clothing and gloves.
•
Do not use the equipment if one is tired or under the influence of drugs, alcohol or medication.
•
In case of poisoning, consult your physician/doctor, have the chemical product container or label at hand.
•
Do not eat, drink or smoke during the entire spraying process (preparation, treatment, cleaning etc.)
•
Disconnect the battery equipment and secure the equipment prior to making any adjustments, changing any
accessories, transport (personally or in a vehicle), lifting or storing.
•
After working with agrochemical products, wash hands and bare skin completely.
/ 13
Advertenties
Inhoudsopgave
