Parkside PBS 350 C3 Vertaling Van De Originele Gebruiksaanwijzing pagina 11
Beschikbare talen
Beschikbare talen
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medica-
tion. A moment of inattention while operating pow-
er tools may result in serious personal injury.
b) Wear personal protective equipment and always
safety goggles. Protective equipment such as a
dust mask, non-skid safety shoes, safety helmet or
hearing protection used for appropriate conditions
will reduce personal injuries.
c) Prevent
unintentional
switch is in the off-position before connecting
to power source and/or rechargeable battery,
picking up or carrying the tool. Carrying power
tools with your finger on the switch or energising
power tools that have the switch on invites acci-
dents.
d) Remove any adjusting tools or spanners/keys
before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool
may result in personal injury.
e) Avoid abnormal postures. Keep proper footing
and balance at all times. This enables better con-
trol of the power tool in unexpected situations.
f)
Wear suitable clothing. Do not wear loose cloth-
ing or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust extraction can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a sec-
ond.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct pow-
er tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing power
tools. Such precautionary measures reduce the
risk of starting the power tool accidentally.
starting.
Ensure
the
d) Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools and attachments. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If dam-
aged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f)
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use electric tools, insertion tools, etc. accord-
ing to these instructions. Take into account the
working conditions and the work to be per-
formed. Use of the power tool for operations differ-
ent from those intended could result in a hazardous
situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe han-
dling and control of the tool in unexpected situa-
tions.
5) Service
a) Only have your power tool repaired by qualified
specialists and only with original spare parts.
This will ensure that the safety of the power tool is
maintained.
6.1
Safety instructions for band saws
a)
Do not use damaged or deformed saw blades.
Damaged or deformed saw blades could break
and/or bend.
b) Do not use coolant fluids. The use of water or
other coolants can cause electric shock.
c) Operate the band saw at the appropriate speed
for the permissible applications and materials.
Working at an improper speed for the material be-
ing cut can lead to saw blade breakage and bodily
injury.
d) Do not operate the power tool with the access
cover to the saw blade open. Contact with mov-
ing parts can cause bodily injury.
6.2
Additional safety instructions
WARNING
Tool attachments may be sharp and become hot
during use. Always wear protective gloves when han-
dling the tool attachments.
GB / IE / NI / CY / MT
|
5
