Dustguard™ System Water Filter Cleaning (Optional); Hopper Hydraulic Lifting System Oil Level Check - Nilfisk Sw4000 Gebruiksaanwijzing
Inhoudsopgave
Beschikbare talen
Beschikbare talen
DUSTGUARD™ SYSTEM WATER FILTER CLEANING (OPTIONAL)
NOTE
system tank (24).
1.
Drive the machine on a level ground.
2.
Turn the ignition key (61) to "0" and engage the parking
brake.
3.
assembly (B) of the dust guard system.
4.
Unscrew and remove the transparent cover (C) with the
5.
Clean and install them on the holder (F).
NOTE
holder.
HOPPER HYDRAULIC LIFTING SYSTEM OIL LEVEL CHECK
WARNING!
Procedure to be performed with the hopper (11)
fully retracted.
1.
Turn the ignition key (61) to "0" and engage the parking
brake.
2.
Open the battery compartment hood (18) with the handle
(41) and fasten it with the support rod (52).
3.
Check that the oil level in the tank (51) is between the
4.
If necessary, add oil through the plug (A, Fig. 21), using the
5.
Remove the support rod (52) and close the hood (18).
USER MANUAL
A
B
Figure 20
Figure 21
1464809000 - SW4000
ENGLISH
F
D
E
C
P100651
P100607
29
Hoofdstukken
Inhoudsopgave
