Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TROUBLESHOOTING
Trouble
The motors do not operate.
The recovery water vacuuming is insuffi cient.
The solution fl ow to the brushes is insuffi cient.
The squeegee leaves marks on the fl oor.
For further information refer to the Service Manual, available at any Nilfi sk Alto Service Center.
9097056000(2)2009-06 A
Possible Cause
The power supply cable or the relevant plug
is broken.
The recovery tank is full.
The hose is disconnected from the squeegee. Connect.
The vacuum grid is clogged or the fl oat is
closing.
The squeegee is dirty, or the squeegee blades
are worn or damaged.
The tank cover is not properly closed, or the
gasket is damaged.
The solution fi lter is dirty.
The tank is dirty (the drain hole is clogged).
There are debris under the squeegee blades.
The squeegee blades are worn, chipped or
torn.
The squeegee is not balanced with the
handwheel.
SCRUBTEC 545E – 553E
USER MANUAL
Remedy
Replace the cable.
Empty the tank.
Clean the grid or check the fl oat.
Clean and check the squeegee.
Close the cover or clean/replace the gasket.
Clean the fi lter.
Clean the tank.
Remove the debris.
Replace the blades.
Adjust.
ENGLISH
19
Advertenties
Hoofdstukken
Inhoudsopgave
