Kärcher RCX 4 Originele Gebruiksaanwijzing pagina 21
Beschikbare talen
Beschikbare talen
Note
If the password was entered incorrectly, the display
shows "ERR".
Switch on the lawnmower
1. Press and hold the ON / OFF button for 2 seconds.
2. Press the START button and confirm with "OK".
Note
Do not use the device at night. The device cannot rec-
ognise and avoid obstacles in the dark.
Note
Ensure the lawn is free from scattered objects to main-
tain effective mowing.
Switch off the lawnmower
1. Press and hold the ON / OFF button for 3 seconds.
"bye" is shown on the display.
Note
The lawnmower cannot be switched off when it is in the
charging station.
Note
To restart the lawnmower, press and hold the ON/OFF
button for 10 seconds.
Creating a map
The map for the workspace is created using the app.
Note
Make sure that both the charging station and the RTK
antenna are outside the demarcated area. There must
be no obstacles within a 1.5 m radius of the RTK anten-
na.
Illustration R
● A: Work area 1
● B: Work area 2
● C: Transition to work area 2
● D: Obstacle
● E: No-Go Zone
A/B: The work area defines the zone in which the robot-
ic mower automatically mows the grass. This area is de-
fined by the user using virtual boundaries.
C: The transition corridor is a path defined by the user
between two work areas through which the device is to
travel. The device can work automatically in this path,
but does not mow grass.
D: An obstacle is an immovable object and defines an
area that the lawnmower cannot pass.
E: No-go zones define areas that the lawnmower is not
allowed to drive over. They are defined by virtual bound-
aries.
Note
Before creating a map, make sure that the remaining
battery life is over 50 %.
1. Press the "Create map" button in the app.
2. Follow the step-by-step instructions.
Adaptation options in the app
● Determining no-go zones and virtual walls
● Define transitions between work areas
● Delete maps
Perform firmware update
If a new firmware version is available, a notification ap-
pears in the app. It is recommended to carry out the up-
date as soon as a new version is available.
Ensure the following points before updating:
● The device is in the charging station.
● The network is available.
● The remaining battery life is more than 30 %.
● No mowing is planned within the next hour.
Note
Do not move the lawnmower during the update process.
1. Trigger the firmware update via the app.
The lawnmower light flashes blue during the update.
Once the update is complete, the lawnmower's light
turns green.
WARNING
Sharp blade
Incision injuries
Be careful when tipping or lifting the device.
Keep all parts of your body away from the cutting blade.
Illustration Q
DANGER
Danger from sharp blades
Uncontrolled starting of the lawnmower can lead to se-
rious injuries.
Make sure that the lawnmower is completely switched
off!
1. Clean the device (see ).
2. Pack the device in its original packaging.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
Note
Always store the device in a dry place and fully charge
the battery.
Care and service
WARNING
Sharp blade
Incision injuries
Be careful when tipping or lifting the device.
Keep all parts of your body away from the cutting blade.
Cleaning the device
ATTENTION
Incorrect cleaning
Damage to the device
Clean the device with a damp cloth.
Do not use solvent-based cleaning agents.
Do not immerse the device in water.
Do not clean the device with a hose or high-pressure
water jet.
DANGER
Danger from sharp blades
Uncontrolled starting of the lawnmower can lead to se-
rious injuries!
Make sure that the lawnmower is completely switched
off!
Note
Clean the mowing disc, housing, wheels and rain sen-
sor regularly using a low-pressure water hose with a
wide jet
Replacing the blade
DANGER
Danger from sharp blades
Uncontrolled starting of the lawnmower can lead to se-
rious injuries!
Make sure that the lawnmower is completely switched
off!
English
Transport
Storage
21
