Medela Thopaz+ Gebruiksaanwijzing pagina 10
Safety instructions
– Thopaz + is a medical device that requires specific safety measures in regard to EMC�
It must be installed and put into operation in accordance with the attached EMC
information in chapter 19 – Technical documentation�
– In each of the following cases, Thopaz + must not be used and it must be repaired by
Customer Services:
– If the power cord or the plug are damaged
– If the device is not functioning according to routine check
– If the device is damaged
– If the device shows clear safety defects�
– Thopaz + has no user serviceable parts inside� For safety reasons, it is required that
Thopaz + is repaired throughout its service life strictly and exclusively by Medela
authorised service centres�
– Keep the power supply cord away from hot surfaces�
– The mains plug and the on/off switch must not come into contact with moisture� Never
pull the mains plug out of the fixed mains socket by pulling on the power supply cord�
– Thopaz + must stand upright during use�
– Separation from the mains is only assured through the disconnection of the mains
adapter and fixed socket connection�
– Never use the device at high room temperatures, while bathing or showering, if you
are very tired or in an environment where there is a risk of explosion�
– Never place Thopaz + in water or other liquids�
– When attaching a new canister, verify that the canister size displayed on screen is the
same size as the canister attached�
– When using single use, sterile products, please note that they are not intended to
be reprocessed� Reprocessing could cause loss of mechanical, chemical and / or
biological characteristics� Reuse could cause cross contamination�
– Contact your local Medela customer service representative for assistance with product
operations�
– The patient should be regularly monitored according to internal hospital guidelines�
These instructions for use must be kept for later reference�
10 |
Warnings and safety instructions
