Medela Thopaz+ Gebruiksaanwijzing pagina 36
8 Replace canister
WARNINGS
The canister is replaced on the basis of a visual check or according to the instructions on
the Thopaz + display (warning signal)� Wear gloves for all operations�
CAUTIONS
Canister changes shall be recorded for safety reasons�
36 |
Replace canister
1� Prepare sterile canister (with/without solidifier)�
2� Clamp off patient tubing with the tube clamp�
3�
3 sec.
4�
5�
6�
3�1 Switch Thopaz + to
Standby by pressing
"Standby" for longer than
3 seconds�
4�1 Release the canister by
pressing the release
button�
4�2 Remove canister�
5�1 Unpack the canister�
5�2 Position the openings at
the top and attach the
bottom part of the canister
to Thopaz + �
6�1 Push the canister into
Thopaz + until you hear a
click�
Safety related tip
Using a 2 l canister
refer to chapter 7�3�1
– Using 2 l canister�
