Dometic CRUISE CONTROL MS880 Handleiding pagina 12
Verberg thumbnails
Zie ook voor CRUISE CONTROL MS880:
- Montagehandleiding en gebruiksaanwijzing (292 pagina's)
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Setting the sensitivity
MS880
To alter the GAIN value, proceed as follows:
➤ Start setup mode (chapter "Starting setup mode" on page 8).
➤ Apply the brake and hold it down.
➤ With the brake applied, press the RES button four times.
✓ You will hear four low-pitched signals.
➤ Release the brake.
✓ You will hear four acoustic signals.
➤ Start the engine.
➤ Drive the vehicle at any speed above the activation speed (40 km/h) to set the
GAIN value.
➤ Press the SET button.
✓ The cruise control switches itself on.
➤ Press the SET button again to increase the GAIN value or
➤ ... press the RES button to decrease the GAIN value.
✓ You will hear a signal each time you press the button.
➤ To save the set values, apply the brake.
➤ Quit setup mode (chapter "Quitting setup mode" on page 12).
3.5
Quitting setup mode
To quit setup mode, proceed as follows:
➤ Stop the vehicle.
➤ Apply the brake and hold it down.
➤ Press the SET button four times.
✓ You will hear a long signal.
✓ You have now quit setup mode.
12
EN
