Advertenties
Beschikbare talen
Beschikbare talen
3.2.4
Welding in premium mode
Press Premium mode.
Enter the ambient temperature and press the Enter button. The following appears if the tem-
perature was not entered correctly:
Place the electrical cutting unit between the two work pieces to be welded.
P250-355B: Switch on the miller motor and lock the switch in place.
P500-630B: Verify the direction of rotation! The machines were polarised to turn clockwise
before leaving our factory!
Switch on the milling unit by pressing the text field. The cutting disks must run in the cutting
direction. If they don't, use an appropriate tool to switch the phase inverter on the electrical
plug.
Risk of serious injury! During operation trimmer unit, stay a safe distance away from the
machine, and do not reach into the rotating knife. Use trimmer in working position only
and return it into the designated carrying frame immediately after use. Ensure that the
safety switch functions properly at all times to avoid any accidental starting of the
trimmer away from the basic machine!
Pressing the arrow key causes the machine to start up.
EXIT takes the program to the main menu without saving.
ENGLISH
39
Advertenties
