Parkside PBKS 53 B3 Vertaling Van De Originele Gebruiksaanwijzing pagina 50
Beschikbare talen
Beschikbare talen
GB
MT
manufacture, a small amount of oil
may remain in the tank after empty-
ing, which may slightly dirty the hous-
ing during transport. Please clean the
housing with a cloth.
Cleaning
WARNING! Electric shock! Never
spray down the device with water.
WARNING! Always carry out
cleaning work with: engine switched
off, engine cooled down, spark plug
connector disconnected and chain
brake active.
CAUTION! Cutting injuries! Wear
cut-resistant gloves when working
with the saw chain or with the blade
bar.
NOTICE! Risk of damage. Chemic-
al substances may attack the plastic
parts of the machine. Do not use any
cleaning agents or solvents.
Clean the machine thoroughly. This
will extend the life of the machine and
prevent accidents.
Cleaning after every use
• Keep the handles free of petrol, oil
or grease. If necessary, clean the
Machine part
Chain brake
components
Sprocket (24)
Saw chain (9)
Saw chain (9)
Blade bar (10)
Blade bar (10)
50
Action
Visual inspection,
replace as needed
Visual inspection,
replace as needed
Check saw chain, oil, reg-
rind or replace if necessary
Clean and oil the saw chain
Servicing the
blade bar, p. 55
Turning the blade
bar, p. 56
handles with a damp cloth washed
in soapy water.
• Clean the saw chain. Do not use
any liquids to clean the saw chain.
Lightly oil the saw chain with chain
oil after cleaning.
• For cleaning, also remove the
sprocket cover (13) so that this
area can also be cleaned.
• Clean the blade bar (10)
• Clean the ventilation slits and the
surface of the machine with a
paintbrush or dry cloth.
• Clean the oil passage (26) to en-
sure fault-free, automatic oiling of
the saw chain during operation.
Use a brush or a cloth to help re-
move residues from the oil pas-
sage.
Maintenance
Service intervals
Carefully perform the maintenance
tasks listed in the following table on
a regular basis. Regular servicing of
your device will extend its life. Ad-
ditionally, you will achieve optimum
cutting performance and prevent ac-
cidents.
Before
After 10
each use
✓
✓
✓
✓
After
hours
each use
of use
✓
✓
✓
