VEVOR S7Y Handleiding pagina 10
Loopbandpad
Beschikbare talen
Beschikbare talen
buzzer
To start running, stop the treadmill and press the start / stop key on the remote
control to turn off the treadmill.
2, Speed + key: to speed up the treadmill when the treadmill is running, press
the speed + on the remote control to increase
3, Speed-key: when the treadmill is running, press the speed key on the
remote control to reduce the speed of the treadmill.
Daily Maintenance
Maintenance of electric treadmill:
Appropriate maintenance is the only way to keep your treadmill in optimum state.
Wrong maintenance will damage or shorten the service life of treadmill.
Important reminder
• Please don't clean the treadmill with sandpaper or solvent. The controller of
treadmill shall not be directly exposed to sunlight or damp to prevent damage.
• Frequently inspect and lock all parts of treadmill and immediately replace the
damaged parts.
Regulate running belt
Adjustment of running belt is equipped with two functions: adjustment of degree of
tightness and central position of running belt. The running belt has been adjusted
when leaving the factory, but it will be stretched after use to deviate from central
position to cause damage by wearing trim strip and rear protecting cover. It is
normal to stretch the running belt in use.
Adjust running belt
If the running belt is slip or not smooth when you use the treadmill, you can
improve it by adjusting degree of tightness of running belt.
How to adjust running belt
1.
Insert 5mm hexagon wrench into the regulating screw on the left of running
belt, and turn the wrench by 1/4 of a circle clockwise to regulate the rear
10
