VEVOR S7Y Handleiding pagina 12
Loopbandpad
Beschikbare talen
Beschikbare talen
Lubricating oil (MANUAL OIL)
The treadmill is oiled when leaving the factory, but lubricity of treadmill shall be
inspected frequently, which helps to keep it in optimum state. The treadmill must
be oiled after 1 year or running for 100h.
Lift one side of the running belt and touch the surface of running platform after
running for 30h or 30 days. It is unnecessary to lubricate if there is silicone oil; if
the surface is clearly dry, please oil it as instructed below.
As shown in the figure, it needs to open the oil cap, pour the silicon oil into the oil
port, after finished,turn on the treadmill to run for some time.
Note: Stop the treadmill to make the running belt still when oiling the running
belt.And please use non-petroleum silicone oil.
Cleaning
Frequently clean the treadmill to guarantee its service life.
12
