Advertenties
2.
Pull the underside of the on-board computer 4
holder on the handlebars.
3. Remove the on-board computer 4 by pulling the on-board computer towards you and tilting
the underside up.
NOTICE
Always take the on-board computer with you if you park the e-bike somewhere.
4.6.1.
Optional: adjusting the on-board computer
You can also adjust the on-board computer so it is attached to the handlebars at the desired
angle to read the display optimally.
Figure 20 - Loosening and adjusting the holder.
1. Loosen the adjusting screw on the side of the holder I until you can tilt the holder I. Use a
Torx T20 screwdriver for this.
2. Tighten the adjusting screw of the holder again in the desired angle.
4.6.2.
Optional: Changing the on-board computer
It is possible to replace the on-board computer Kiox 300 with your smartphone. To do so, you
need to purchase the SmartPhoneGrip from Bosch. Ask your dealer or have a look at the Bosch
eBike webpage for more information.
The Purion 200 on-board computer has a built-in battery which you cannot replace yourself.
4
The e-bike will automatically turn off to save energy after 10 minutes of inactivity.
4
4.7. Analysing ride data with the Bosch Flow app
To download all data from the on-board computer 4
(available in the App Store or Google Play Store) on your smartphone. You can use this app to
analyse ride data and routes etc.
4.7.1.
Pairing the on-board computer with the app
1. Open the app.
2. Create a Bosch user account with your email address, or log in with your existing Bosch user
82
towards you and click the underside in the
, you can install the Bosch Flow app
Advertenties
