Advertenties
• If a bolt is tightened tighter than specified, there is a risk of overtightening. This could cause
the bolt to break in case of prolonged heavy loading while cycling.
• If a bolt is too loose, the saddle may shift in the rails. This could also cause a leverage effect,
which could break the bolts or parts on the saddle or clamp. This can lead to dangerous
situations. The specified tightening torque can be found on the seatpost and all bicycle
tightening torques can be found in Appendix 2 of this manual. Check once a month to make
sure the saddle is tight, but do not tighten harder than prescribed. If you do not have a torque
wrench, have your dealer check the saddle fastener at every service.
CAUTION
6
The clamp should be fixed within the marking on the saddle rails. Attach the saddle within the
marking.
4.8.2.
Adjusting the handlebars
Once you have adjusted the saddle correctly, you can adjust the handlebars for a comfortable
cycling position.
You can adjust the height of the handlebars as follows:
Figure 24 - Adjusting the position of the handlebars for a comfortable riding posture.
86
Advertenties
