Advertenties
Beschikbare talen
Beschikbare talen
2.2 TECHNICAL DATA
This paragraph describes the technical data of the product purchased.
TOOL
Max. cutting capacity
Motor
Motor power
Mass/weight without battery
Total shear length
Cutting speed
BATTERY PACK
Battery technology
Rated voltage
Max. voltage
Capacity
Nominal output energy
Battery autonomy
Recharge time
Mass/Weight
BATTERY CHARGER
Charger model
Input voltage
Frequency
Output voltage for charging
Type of rechargeable batteries
Output current I out max
Protection rating
Insulation class
Weight
Noise level (*)
Vibration level (**)
(*) Continuous A-weighted sound pressure level at the operator's position (LpA) and sound power level of the tool
(LwA), both measured according to standard EN ISO 3744
(**) The frequency-weighted root mean square vibration values of the acceleration to which the hand-arm system is
exposed (for both lower and upper handle) are measured according to EN ISO 5349-1 and 2
ELECTROMAGNETIC COMPATIBILITY LEVEL
The machine contains electronic components subject to Electromagnetic Compatibility regulations, affected by
conducted and radiated emissions.
Emission values comply with regulatory requirements through the use of components that comply with the
Electromagnetic Compatibility Directive, suitable connections and installation in accordance with the requirements of
the component suppliers.
The machine therefore complies with the Electromagnetic Compatibility (EMC) directive.
0310.0369_02
TECHNICAL DATA
STARK 90
STARK 160
Ø 38 mm
Brushless
720 W
1985 g
860 mm
1,1 s
Lithium Ions
21.6 V
25.2 V
2.5 Ah
54 Wh
4-6 h depending on use
1.5-2 h
330 g
KH24-250950-2E
100-240Vac ±10%
50/60Hz ±2Hz
25.2V
Li-Ion
0.95 A
IP 20
270 g
LwA 82,5 dB(A)
1,312 m/s
68
STARK 220
Ø 38 mm
Ø 38 mm
Brushless
Brushless
720 W
720 W
2370 g
2785 g
1580 mm
2260 mm
1,1 s
1,1 s
-
-
II
KwA=3 dB(A)
k=1,5 m/s²
Advertenties
