Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.3 REPRESENTATION OF AVAILABLE MODELS
The product is available in the three configurations shown in the table below.
Products table
STARK 90 shear
STARK 160 shear
STARK 220 shear
3.
PRODUCT DESCRIPTION
The product covered by this manual is an electric pruning shear, powered by a battery, as shown in the product table
above, the permitted use of which is specified in the following paragraph.
The shear equipped with hardened steel blades consists of a handle integral with the extension pole that supports the
blade assembly. The cutting force is provided by a gearmotor equipped with a recirculating ball screw that transmits
motion to the blades via a tie rod.
3.1 PERMITTED - INTENDED USE
The product is for a professional use only in agriculture.
The Electric Shear is a product dedicated exclusively to pruning orchards, vineyards, citrus orchards, olive groves and
all plants in general. It is capable of cutting woody plants with a maximum diameter as shown in the technical data
table in paragraph 2.2.
The use of these products must only and exclusively be entrusted to trained and authorised personnel with the
professional knowledge and skills to ensure their safe and proper use.
The training and sensitizing of the operator must be entrusted to skilled personnel, capable of developing qualified
theoretical and practical training to enable them to correctly implement all the technical operations and behaviours that
are decisive for their own safety and the safety of persons working in the areas where the product is used.
Ways of use specified in the manual as incorrect must never be permitted under any circumstances.
Improper use of the product and/or lack of maintenance can lead to serious danger to personnel.
The actions described in this manual as forbidden and not permitted, which obviously cannot cover the whole range
of potential possibilities for "non-permitted use" of the product, are however the most "reasonably" foreseeable ones
and are to be considered absolutely forbidden.
Only use the product from the ground in a safe and stable position, ensuring perfect and stable balance during use
and handling.
It is forbidden to use the product when precariously balanced on surfaces where the risk of slipping is present (for
example on a hill and/or on damp grass, snow, ice, etc.) or any place where it is impossible to maintain a stable balance
(for example on steep slopes).
Avoid working in bad weather conditions, such as fog, heavy rain, strong winds, hailstorms, snow and ice,
thunderstorms (risk of electrocution).
Cutting activities must be carried out in compliance with the maximum cutting dimensions specified in the technical
data table of the purchased product and only with woody plants.
0310.0369_02
69
Advertenties
Inhoudsopgave
