Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.13.10 CIRCUIT FAULTS
•
Due to possible failures, control, safety and power supply circuits/components may lose part of their
effectiveness, which may lower the safety level.
•
Carry out periodic checks on the functional state of the devices/components on the product and all
connections
4.13.11 LIGHTNING
Since it is a hand-held tool that is used outdoors, it is not equipped with protection against the effects of lightning.
•
Inform the personnel in charge of maintenance and ensure that they are duly instructed in the performance of
the task, as well as aware of the residual risks present.
•
It is forbidden to carry out any activities during adverse weather conditions (risk of lightning or thunderstorms).
4.13.12 RISK OF SCALDING/BURNS
On the cutting area, there is a potential risk of scalding if there is no or inadequate lubrication.
•
Inform the personnel in charge of maintenance or use of the product.
•
Access these areas by first waiting for these parts to cool down and wearing suitable temperature protection
gloves, taking great care.
4.14 ADDITIONAL HAZARD PRESCRIPTIONS
DANGER
•
Never use the product if it is damaged, wrongly regulated or only partially assembled.
•
Do not use the product if the ON/OFF switch does not work correctly.
•
Do not use the product while operating on a ladder, scaffolding or a surface that is not the ground level
and/or not a stable surface.
•
Do not use the product near electrical cables
•
Exercise caution and concentration on the activities you are performing by using common sense and
observing the applicable safety regulations when using the product.
•
Do not touch any type of moving parts, just as it is forbidden to carry out maintenance (routine and/or
extraordinary) with moving parts. It is a mandatory requirement to disconnect power before carrying out any
maintenance activities.
•
It is forbidden to use petrol, solvents or other flammable products to clean or wash the product.
•
Do not tamper with, modify and/or by-pass the guards, command, control and safety devices on the product.
DANGER
During operation and maintenance of the product, use footwear, gloves and goggles or safety screen
0310.0369_02
86
Advertenties
Inhoudsopgave
