Advertenties
Beschikbare talen
Beschikbare talen
CAUTION
Before carrying out any maintenance or mechanical adjustment of the product, it is imperative to
wear PPE such as safety shoes, overalls, puncture-proof gloves and goggles to protect the face.
•
Any repair or maintenance work may only be carried out by duly trained personnel. Informed and
instructed, and authorised with the required professional profile (mechanical maintenance technician
and/or electrical maintenance technician) depending on the type of work to be carried out.
•
Only the adjustment, lubrication of the blades and cleaning of the product can also be carried out by the
operator. While all other maintenance activities are precluded to them.
•
It is a mandatory requirement to disconnect the product from the power source before any adjustment
and/or maintenance work (battery pack).
•
During operation, maintenance and/or repair work, unauthorised persons must keep a distance of at least
5 metres from the operating range of the product.
•
The removal of protective or safety devices (where fitted) must only be carried out for extraordinary
maintenance operations and only by maintenance personnel, after disconnection of power sources. The
maintenance technician must ensure the safety of all personnel, also in order to avoid any damage to the
product, as well as to restore the effectiveness of the equipment itself at the end of maintenance and
always before using again.
•
All the maintenance operations which are not described in this manual have to be performed by the
manufacturer's T.A.C.
•
The maintenance, repair and troubleshooting work must be concluded with the verification of the correct
functioning and of all active safety devices.
•
When maintenance or repairs have been completed, the product can be started again only if duly verified
by a maintenance technician, who must make sure that:
-
work has been completed;
-
the product works perfectly;
-
the safety devices are activated;
-
no one is operating on the product.
4.15 ADDITIONAL PRECAUTIONARY REQUIREMENTS
CAUTION
Ensure that all personnel involved in the maintenance and use of the product are properly trained and
instructed in the correct safety and operating procedures.
Ensure that all personnel are aware of the residual risks present.
CAUTION
Never service the product while it is running.
CAUTION
Ensure that all safety devices are connected and in good working order. Never modify or bypass any of the
safety devices.
CAUTION
When the tool is not in use, turn off the ON/OFF switch to avoid unnecessary battery consumption and/or
component deterioration.
CAUTION
The product must be inspected before use and in any case after dropping or impact in order to identify any
damage.
0310.0369_02
88
Advertenties
