Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7.3.2 LIST OF MAINTENANCE ACTIVITIES AND FREQUENCY
The table below shows the maintenance tasks, with their frequency:
Check the total integrity of the product.
Check chain lubrication
Check the condition and tension of the chain
Check the condition of the bar
Check the integrity of the safety devices and guards.
Check that all screws are tightened correctly
Check and top up the oil
Remove cutting residues.
Check the chain pinion for wear.
Check battery efficiency
Periodic overhaul to be carried out at a Manufacturer's
Authorised Assistance Centre.
Battery holding recharge. Necessary to prevent it from
dropping below 15V (no longer rechargeable).
For details on the operating modes, please refer to this manual and in particular to par. 7.1 and 7.2.
With regard to any trade components installed on the product and for which specific documentation has been
provided, reference must be made to the aforementioned documentation for all activities.
7.3.3 LUBRICANTS
The product has been designed in such a way as to reduce lubrication-related operations; however, due to its
inherent use, lubricants for the cutting part are required.
We recommend professional oil or SAE 30 oil for lubricating the pruner chain.
The grease specified below must be used for all maintenance activities relating to the greasing of mechanical parts
in all disassembly/assembly and/or adjustment activities covered by the maintenance activity.
PAKELO MOTOR OIL Srl
Supplier
MULTIPLEX EP NLGI 2 Grease
Type
Suitable when exceptional load and wear resistance is required in a variety of
Use
applications.
Before use, request the 'product safety data sheet' from the manufacturer, which can also normally be found on the
supplier's website.
Do not use lubricants other than those specified by the manufacturer at the points where its use is intended.
Do not mix with other lubricants. Careful use is recommended.
When handling/using grease, always use waterproof protective gloves and observe the safety data sheet of the
grease.
0310.0353_04
MAINTENANCE
Grease commercial data
ROUTINE
X
X
X
X
X
X
X
X
X
X
X
X
X
X
111
EXTRAORDINARY
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Advertenties
Inhoudsopgave
