Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.4 ACCESSORY PARTS
The following are accessory parts for the product covered by this manual and supplied in the packaging:
-
One additional battery (total 2)
-
Quick guide,
-
Certificate of Warranty,
-
Declaration of conformity,
-
Tool kit,
-
Chain sharpening file,
-
Dedicated carrying case.
3.5 GENERAL OPERATING CHARACTERISTICS
This paragraph describes the general operating characteristics of the product purchased.
➢
BATTERY CHARGE SIGNALLING LED
The LED bar (8) on the tool indicates the battery charge status and consists of four LEDs whose meaning is
described below:
•
All LEDs lit= battery charge status is 75% to 100%,
•
3 LEDs lit= battery charge status is from 50% to 75%,
•
2 LEDs lit= battery charge status is 25% to 50%,
•
1 LED lit= battery charge status is 0% to 25%.
DESCRIPTION OF FUNCTIONS:
➢
PRUNER ON/OFF SWITCH
The functions related to the power button are listed below.
Switch on: After connecting the battery, the battery charge indicator LEDs are switched off. A long press
on the power button causes the LED bar to switch on, confirmed by two beeps.
Switch off: With the LED bar switched on, a long press of the power button causes the tool to switch off,
confirmed by the LEDs going out.
➢
VARIABLE SPEED
Chain speed is varied by pressing on the operating lever in the ways listed below.
A. Press the operating lever partially down to achieve minimum chain speed.
B. Press the operating lever fully to achieve maximum chain speed.
A. Minimum speed.
0310.0353_04
B. Maximum speed.
74
Advertenties
Inhoudsopgave
